Metrohm 732 IC Detector - Manual (Page 15)

1 Introduction
732 IC Detector / 733 IC Separation Center
8
1.3 Information on the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 732 IC Detector and 733 IC Separation Center into operation. The
Instructions for Use contain information and warnings which must be
heeded the user to assure safe operation of the instruments.
1.3.1 Organization
These 8.732.1033 Instructions for Use for the 732 IC Detector and
733 IC Separation Center provide a comprehensive overview of the in-
stallation, startup procedure, operation, fault rectification and technical
specifications of these instruments. The Instructions for Use are organ-
ized as follows:
Section 1 Introduction
General description of instruments, parts and controls
and safety notes
Section 2 Installation
Installation of 732 IC Detector / 733 IC Separation Cen-
ter, attachment of accessories and external devices
Section 3 Operating tutorial
Introduction to the operation using an example
Section 4 Operation
Detailed description of the operation and explanation of
functions of all keys
Section 5 Notes – Maintenance – Faults
Notes on ion chromatography, maintenance, fault rectifi-
cation, diagnostic tests, validation
Section 6 Interfaces (green pages)
Description of RS232 interfaces, remote interfaces, valve
interface and analog output
Section 7 Appendix
Technical data, standard equipment, options, warranty,
declarations of conformity, index
To find the required information on the instruments, you will find it an
advantage to use either the Table of contents or the Index at the
back. The 8.732.1043 Quick Reference Guide is suitable for use as a
reference work for daily use as it explains the most important parame-
ters and key functions.
As a supplement to the Instructions for Use, the Metrohm Monograph
8.732.2003 "Ion chromatography" is also supplied. This provides an
introduction to the theoretical fundamentals and general information on
separating columns and sample pretreatment. You will find detailed in-
formation on the separating columns available from Metrohm and on
special IC applications in the relevant "Application Bulletins", which
are available on request free of charge from your Metrohm agency.