Radius client, Tacacs+ client, Tftp – Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual
Page 647
To configure the VRF name in outbound Telnet sessions, enter the following command at the privileged
EXEC level:
device(config)# telnet vrf red 10.157.22.39
Syntax: telnet vrf vrf-name IPv4address | ipv6 IPv6address
The vrf-name variable specifies the name of the pre-configured VRF.
RADIUS client
When the management VRF is configured, the RADIUS client will sends RADIUS requests or receives
responses only through the ports belonging to the management VRF and through the out-of-band
management port.
Any change in the management VRF configuration will be immediately effective for the RADIUS client.
NOTE
The RADIUS source interface configuration command ip radius source-interface must be compatible
with the management VRF configuration.
TACACS+ client
When the management VRF is configured, the TACACS+ client establishes connections with TACACS+
servers only through the ports belonging to the management VRF and the out-of-band management
port.
For the TACACS+ client, any change in the management VRF configuration will not affect the existing
TACACS+ connections and the changes will be applied only to the new TACACS+ connections.
NOTE
The TACACS+ source interface configuration command ip tacacs source-interface must be
compatible with the management VRF configuration.
TFTP
When the management VRF is configured, TFTP will send or receive the data and acknowledgements
only through the ports belonging to the management VRF and through the out-of-band management
port.
Any change in the management VRF configuration will be immediately effective for TFTP. You cannot
change in the management VRF configuration while TFTP is in progress.
NOTE
The TFTP source interface configuration command ip tftp source-interface must be compatible with
the management VRF configuration.
SCP
SCP uses SSH as underlying transport. The behavior of SCP is similar to the SSH server.
RADIUS client
FastIron Ethernet Switch Layer 3 Routing Configuration Guide
647
53-1003087-04