Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 562)

show ipv6 bgp neighbor output descriptions (Continued) TABLE 112
This field... Displays...
Last Connection Reset
Reason (cont.) • Reasons specific to the implementation:
‐ Reset All Peer Sessions
‐ User Reset Peer Session
‐ Port State Down
‐ Peer Removed
‐ Peer Shutdown
‐ Peer AS Number Change
‐ Peer AS Confederation Change
‐ TCP Connection KeepAlive Timeout
‐ TCP Connection Closed by Remote
‐ TCP Data Stream Error Detected
Notification Sent If the device receives a NOTIFICATION message from the neighbor, the message
contains an error code corresponding to one of the following errors. Some errors have
subcodes that clarify the reason for the error. Where applicable, the subcode messages
are listed underneath the error code messages.
• Message Header Error
‐ Connection Not Synchronized
‐ Bad Message Length
‐ Bad Message Type
‐ Unspecified
• Open Message Error
‐ Unsupported Version
‐ Bad Peer As
‐ Bad BGP Identifier
‐ Unsupported Optional Parameter
‐ Authentication Failure
‐ Unacceptable Hold Time
‐ Unspecified
• Update Message Error
‐ Malformed Attribute List
‐ Unrecognized Attribute
‐ Missing Attribute
‐ Attribute Flag Error
‐ Attribute Length Error
‐ Invalid Origin Attribute
‐ Invalid NextHop Attribute
‐ Optional Attribute Error
‐ Invalid Network Field
‐ Malformed AS Path
‐ Unspecified
• Hold Timer Expired
• Finite State Machine Error
• Cease
• Unspecified
Configuring BGP4+
562 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04