Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 241)

show ipv6 rip route output descriptions (Continued) TABLE 54
Field Description
Interface The interface name. If "null" appears, the interface is originated locally.
Source of route The source of the route information. The source can be one of the following:
• RIP - routes learned by RIPng.
• CONNECTED - IPv6 routes redistributed from directly connected networks.
• STATIC - IPv6 static routes are redistributed into RIPng.
• BGP - BGP4+ routes are redistributed into RIPng.
• OSPF - OSPFv3 routes are redistributed into RIPng.
Metric number The cost of the route. The number parameter indicates the number of hops to the
destination.
Tag number The tag value of the route.
Timers Indicates if the hold-down timer or the garbage-collection timer is set.
RIPng
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 241
53-1003087-04