beautypg.com

Displaying route details – Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual

Page 499

background image

show ip bgp route output descriptions (Continued)

TABLE 99

This field

Displays

Status

The route status, which can be one or more of the following:

• A - AGGREGATE.The route is an aggregate route for multiple networks.
• B - BEST. BGP4 has determined that this is the optimal route to the destination.

NOTE
If the "b" is lowercase, the software was not able to install the route in the IP route table.

• b - NOT-INSTALLED-BEST. The routes received from the neighbor are the best BGP4 routes

to their destinations, but were not installed in the IP route table because the device received
better routes from other sources (such as OSPF, RIP, or static IP routes).

• C - CONFED_EBGP. The route was learned from a neighbor in the same confederation and

AS, but in a different sub-AS within the confederation.

• D - DAMPED. This route has been dampened (by the route dampening feature), and is

currently unusable.

• H - HISTORY. Route dampening is configured for this route, and the route has a history of

flapping and is unreachable now.

• I - INTERNAL. The route was learned through BGP4.
• L - LOCAL. The route originated on this device.
• M - MULTIPATH. BGP4 load sharing is enabled and this route was selected as one of the

best ones to the destination. The best route among the multiple paths also is marked with "B".

NOTE
If the "m" is lowercase, the software was not able to install the route in the IP route table.

• S - SUPPRESSED. This route was suppressed during aggregation and thus is not advertised

to neighbors.

NOTE
This field appears only if you enter the route option.

Displaying route details

This example shows the information displayed when you use the detail option. In this example, the
information for one route is shown.

device# show ip bgp routes detail 2

Number of BGP Routes matching display condition : 1

Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED

E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH

S:SUPPRESSED F:FILTERED s:STALE

1 Prefix: 10.5.5.5/32, Status: BE, Age: 0h2m10s

NEXT_HOP: 10.0.0.1, Metric: 0, Learned from Peer: 10.0.0.1 (3)

LOCAL_PREF: 100, MED: none, ORIGIN: igp, Weight: 0

AS_PATH: 3

Adj_RIB_out count: 2, Admin distance 20

Last update to IP routing table: 0h2m10s, 1 path(s) installed:

Route is advertised to 2 peers:

10.0.0.3(65002) 10.0.0.5(65002)

Syntax: show ip bgp routes detail

Displaying route details

FastIron Ethernet Switch Layer 3 Routing Configuration Guide

499

53-1003087-04