Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 381)

Clearing OSPF neighbors attached to a specified interface
You can use the clear ipv6 ospf neighbor interface command to delete and relearn the OSPF
neighbors attached to a specified interface, as shown in the following.
device# clear ipv6 ospf neighbor interface ethernet 1/1
Syntax: clear ipv6 ospf neighbor interface [ethernet slot/port | ve port-no | tunnel tunnel-port] [nbr-
id]
Specify the interface options as shown in the following options.
ethernet slot/port - clears OSPF neighbors on the specified Ethernet interface.
ve port-no - clears OSPF neighbors on the specified virtual interface.
tunnel tunnel-port - clears OSPF neighbors on the specified tunnel interface.
Specifying the nbr-id variable limits the clear ipv6 ospf neighbor command to an individual OSPF
neighbor attached to the interface.
Clearing OSPFv3 counters
You can use the ospf counts command to clear OSPF neighbor’s counters as described in the
following:
• Clearing all OSPF Counters
• Clearing the OSPF Counters for a Specified Neighbor
• Clearing the OSPF Counters for a Specified Interface
Clearing all OSPFv3 counters
You can clear all OSPF counters using the clear ipv6 ospf counts command, as shown in the
following.
device# clear ipv6 ospf counts
Syntax: clear ipv6 ospf counts
Clearing OSPFv3 counters for a specified neighbor
You can clear all OSPF counters for a specified neighbor using the clear ipv6 counts neighbor
command, as shown in the following.
device# clear ipv6 ospf counts neighbor 10.10.10.1
Syntax: clear ipv6 ospf counts neighbor nbr-id
The nbr-id variable specifies the neighbor ID of the OSPF neighbor whose counters you want to clear.
Clearing OSPFv3 counters for a specified interface
You can clear all OSPFv3 counters for a specified interface using the clear ipv6 counts neighbor
interface command, as shown in the following.
device# clear ipv6 ospf counts interface ethernet 3/1
Syntax: clear ipv6 ospf counts neighbor [interface ethernet slot/port | ve port-no | tunnel tunnel-
port] [nbr-id]
Clearing OSPFv3 counters
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 381
53-1003087-04