Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 350)

0.0.0.200 Rtr 0 192.168.98.213 800001c7 799 8402 56 Yes
0.0.0.200 Net 1156 192.168.98.111 80000004 823 b2d2 32 Yes
0.0.0.200 Net 136 192.168.98.111 80000008 823 aed2 32 Yes
N/A Extn 0000021d 10.223.223.223 800000a8 1319 441e 32 Yes
Syntax: show ipv6 ospf database [advrtr ipv4-address | as-external [advrtr ipv4-address | link-id
number] | extensive | inter-prefix [advrtr ipv4-address | link-id number] | inter-router [advrtr ipv4-
address | link-id number] | intra-prefix [advrtr ipv4-address | link-id number] | link [advrtr ipv4-
address | link-id number] | link-id number | network [advrtr ipv4-address | link-id number] | router
[advrtr ipv4-address | link-id number]]
The advrtr ipv4-address parameter displays detailed information about the LSAs for a specified
advertising router only.
The as-external keyword displays detailed information about the AS externals LSAs only.
The extensive keyword displays detailed information about all LSAs in the database.
The inter-prefix keyword displays detailed information about the inter-area prefix LSAs only.
The inter-router keyword displays detailed information about the inter-area router LSAs only.
The intra-prefix keyword displays detailed information about the intra-area prefix LSAs only.
The link keyword displays detailed information about the link LSAs only.
The link-id number parameter displays detailed information about the specified link LSAs only.
The network number displays detailed information about the network LSAs only.
The router number displays detailed information about the router LSAs only.
The scope area-id parameter displays detailed information about the LSAs for a specified area, AS, or
link.
show ipv6 ospf database output descriptions TABLE 72
This field Displays
Area ID The OSPF area in which the device resides.
Type Type of LSA. LSA types can be the following:
• Rtr - Router LSAs (Type 1).
• Net - Network LSAs (Type 2).
• Inap - Inter-area prefix LSAs for ABRs (Type 3).
• Inar - Inter-area router LSAs for ASBRs (Type 4).
• Extn - AS external LSAs (Type 5).
• Link - Link LSAs (Type 8).
• Iap - Intra-area prefix LSAs (Type 9).
LS ID The ID of LSA in Decimal.
Adv Rtr The device that advertised the route.
Seq(Hex) The sequence number of the LSA. The OSPF neighbor that sent the LSA
stamps it with a sequence number to enable the device and other OSPF
routers to determine which LSA for a given route is the most recent.
Age The age of the LSA, in seconds.
OSPFv3
350 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04