Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 511)

show ip bgp neighbors output descriptions (Continued) TABLE 103
Field Description
Notification Sent Shows an error code corresponding to one of the following errors if the device sends a
Notification message from the neighbor. Some errors have subcodes that clarify the
reason for the error. The subcode messages are listed underneath the error code
messages, wherever applicable.
• Message Header Error
‐ Connection Not Synchronized
‐ Bad Message Length
‐ Bad Message Type
‐ Unspecified
• Open Message Error
‐ Unsupported Version
‐ Bad Peer AS
‐ Bad BGP Identifier
‐ Unsupported Optional Parameter
‐ Authentication Failure
‐ Unacceptable Hold Time
‐ Unspecified
• Update Message Error
‐ Malformed Attribute List
‐ Unrecognized Attribute
‐ Missing Attribute
‐ Attribute Flag Error
‐ Attribute Length Error
‐ Invalid Origin Attribute
‐ Invalid NextHop Attribute
‐ Optional Attribute Error
‐ Invalid Network Field
‐ Malformed AS Path
‐ Unspecified
• Hold Timer Expired
• Finite State Machine Error
• Cease
• Unspecified
Notification Received Shows an error code corresponding to one of the listed errors in the Notification Sent
field if the device receives a Notification message from the neighbor.
Neighbor NLRI
Negotiation Shows the state of the device’s NLRI negotiation with the neighbor. The states can be
one of the following:
• Peer negotiated IPV4 unicast capability
• Peer negotiated IPV6 unicast capability
• Peer configured for IPV4 unicast routes
• Peer configured for IPV6 unicast routes
Configuring BGP4 (IPv4)
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 511
53-1003087-04