beautypg.com

Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual

Page 197

background image

Ethernet 3/17 up/up 2017::c017:101/64

Ethernet 3/19 up/up 2019::c019:101/64

VE 4 down/down

VE 14 up/up 2024::c060:101/64

Loopback 1 up/up ::1/128

Loopback 2 up/up 2005::303:303/128

Loopback 3 up/up

Syntax: show ipv6 interface [ interface [ port-number | number ] ]

The interface parameter displays detailed information for a specified interface. For the interface, you
can specify the Ethernet , loopback , tunnel , or VE keywords. If you specify an Ethernet interface,
also specify the port number associated with the interface. If you specify a loopback, tunnel, or VE
interface, also specify the number associated with the interface.

This display shows the following information.

General IPv6 interface information fields

TABLE 34

Field

Description

Routing protocols

A one-letter code that represents a routing protocol that can be enabled on an interface.

Interface

The interface type, and the port number or number of the interface.

Status

The status of the interface. The entry in the Status field will be either "up/up" or "down/
down".

Routing

The routing protocols enabled on the interface.

Global Unicast Address The global unicast address of the interface.

To display detailed information for a specific interface, enter a command such as the following at any
CLI level.

device#show ipv6 interface ethernet 3/1

Interface Ethernet 3/1 is up, line protocol is up

IPv6 is enabled, link-local address is fe80::2e0:52ff:fe99:97

Global unicast address(es):

Joined group address(es):

ff02::9

ff02::1:ff99:9700

ff02::2

ff02::1

MTU is 1500 bytes

ICMP redirects are enabled

ND DAD is enabled, number of DAD attempts: 3

ND reachable time is 30 seconds

ND advertised reachable time is 0 seconds

ND retransmit interval is 1 seconds

ND advertised retransmit interval is 0 seconds

ND router advertisements are sent every 200 seconds

ND router advertisements live for 1800 seconds

No Inbound Access List Set

No Outbound Access List Set

RIP enabled

This display shows the following information.

IPv6 Configuration on FastIron X Series, FCX, and ICX Series Switches

FastIron Ethernet Switch Layer 3 Routing Configuration Guide

197

53-1003087-04