Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 485)

The routes-summary option displays a summary of the following information:
• Number of routes received from the neighbor
• Number of routes accepted by this device from the neighbor
• Number of routes this device filtered out of the UPDATES received from the neighbor and did not
accept
• Number of routes advertised to the neighbor
• Number of attribute entries associated with routes received from or advertised to the neighbor.
show ip bgp neighbor output descriptions TABLE 97
This field Displays.
Total Number of BGP4 Neighbors The number of BGP4 neighbors configured.
IP Address The IP address of the neighbor.
AS The AS the neighbor is in.
EBGP or IBGP Whether the neighbor session is an IBGP session, an EBGP session, or a
confederation EBGP session:
• EBGP - The neighbor is in another AS.
• EBGP_Confed - The neighbor is a member of another sub-AS in the
same confederation.
• IBGP - The neighbor is in the same AS.
RouterID The neighbor device ID.
Description The description you gave the neighbor when you configured it on the device.
Local AS The value (if any) of the Local AS configured.
Configuring BGP4 (IPv4)
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 485
53-1003087-04