Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 204)

Receive: expected incoming sequence number = 740507227
Receive: received window = 16384
Receive: bytes in receive queue = 0
Receive: congestion window = 1459
Syntax: show ipv6 tcp status local-ip-address local-port-number remote-ip-address remote-port-
number
The local-ip-address parameter can be the IPv4 or IPv6 address of the local interface over which the
TCP connection is taking place.
The local-port-number parameter is the local port number over which a TCP connection is taking
place.
The remote-ip-address parameter can be the IPv4 or IPv6 address of the remote interface over which
the TCP connection is taking place.
The remote-port-number parameter is the local port number over which a TCP connection is taking
place.
This display shows the following information.
Specific IPv6 TCP connection fields TABLE 41
Field Description
TCP = location The location of the TCP.
local-ip-address local-port-number remote-ip-
address remote-port-number state port This field provides a general summary of the following:
• The local IPv4 or IPv6 address and port number.
• The remote IPv4 or IPv6 address and port number.
• The state of the TCP connection. For information on possible
states, refer to Displaying IPv6 TCP information .
• The port numbers of the local interface.
Send: initial sequence number = number The initial sequence number sent by the local router.
Send: first unacknowledged sequence
number = number The first unacknowledged sequence number sent by the local
router.
Send: current send pointer = number The current send pointer.
Send: next sequence number to send =
number The next sequence number sent by the local router.
Send: remote received window = number The size of the remote received window.
Send: total unacknowledged sequence
number = number The total number of unacknowledged sequence numbers sent by
the local router.
Send: total used buffers number The total number of buffers used by the local router in setting up
the TCP connection.
Receive: initial incoming sequence number =
number The initial incoming sequence number received by the local
router.
IPv6 Configuration on FastIron X Series, FCX, and ICX Series Switches
204 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04