Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 150)

CLI display of IP traffic statistics - Layer 2 switch (Continued) TABLE 29
Field Description
timestamp reply The number of Timestamp Reply messages sent or received by the device.
addr mask The number of Address Mask Request messages sent or received by the
device.
addr mask reply The number of Address Mask Replies messages sent or received by the
device.
irdp advertisement The number of ICMP Router Discovery Protocol (IRDP) Advertisement
messages sent or received by the device.
irdp solicitation The number of IRDP Solicitation messages sent or received by the device.
UDP statistics
received The number of UDP packets received by the device.
sent The number of UDP packets sent by the device.
no port The number of UDP packets dropped because the packet did not contain a
valid UDP port number.
input errors This information is used by Brocade customer support.
TCP statistics
The TCP statistics are derived from RFC 793, "Transmission Control Protocol".
current active tcbs The number of TCP Control Blocks (TCBs) that are currently active.
tcbs allocated The number of TCBs that have been allocated.
tcbs freed The number of TCBs that have been freed.
tcbs protected This information is used by Brocade customer support.
active opens The number of TCP connections opened by this device by sending a TCP SYN
to another device.
passive opens The number of TCP connections opened by this device in response to
connection requests (TCP SYNs) received from other devices.
failed attempts This information is used by Brocade customer support.
active resets The number of TCP connections this device reset by sending a TCP RESET
message to the device at the other end of the connection.
passive resets The number of TCP connections this device reset because the device at the
other end of the connection sent a TCP RESET message.
IP Configuration
150 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04