beautypg.com

Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual

Page 333

background image

To specify an IPv6 prefix list called filterOspfRoutes that denies route 2001:db8:2::/64, enter the
following commands.

device(config)# ipv6 prefix-list filterOspfRoutes seq 5 deny 2001:db8:2::/64

device(config)# ipv6 prefix-list filterOspfRoutes seq 7 permit ::/0 ge 1 le 128

Syntax: ipv6 prefix-list name [seq seq-value] [description string] {deny | permit} ipv6-addr/mask-bits
[ge ge-value] [ le le-value]

To configure a distribution list that applies the filterOspfRoutes prefix list globally.

device(config)# ipv6 router ospf

device(config-ospf6-router)# distribute-list prefix-list filterOspfRoutes in

Syntax: [no] distribute-list prefix-list name in [ethernet slot/port | ve num | loopback num]

After this distribution list is configured, route 2001:db8:2::/64 would be omitted from the OSPFv3 route
table.

device# show ipv6 ospf route

Current Route count: 4

Intra: 3 Inter: 0 External: 1 (Type1 0/Type2 1)

Equal-cost multi-path: 0

Destination Options Area Cost Type2 Cost

Next Hop Router Outgoing Interface

*IA 2001:db8:1::/64 --------- 10.0.0.1 0 0

:: ve 10

*IA 2001:db8:3::/64 V6E---R-- 0.0.0.0 11 0

fe80::2e0:52ff:fe00:10 ve 10

*IA 2001:db8:4::/64 --------- 0.0.0.0 10 0

:: ve 11

*E2 2001:db8:5::/64 --------- 0.0.0.0 10 0

fe80::2e0:52ff:fe00:10 ve 10

The following commands specify an IPv6 prefix list called filterOspfRoutesVe that denies route
2001:db8:3::/64.

device(config)# ipv6 prefix-list filterOspfRoutesVe seq 5 deny 2001:db8:3::/64

device(config)# ipv6 prefix-list filterOspfRoutesVe seq 10 permit ::/0 ge 1 le 128

The following commands configure a distribution list that applies the filterOspfRoutesVe prefix list to
routes pointing to virtual interface 10.

device(config)# ipv6 router ospf

device(config-ospf6-router)# distribute-list prefix-list filterOspfRoutesVe in ve 10

After this distribution list is configured, route 2001:db8:3::/64, pointing to virtual interface 10, would be
omitted from the OSPFv3 route table.

device# show ipv6 ospf route

Current Route count: 4

Intra: 3 Inter: 0 External: 1 (Type1 0/Type2 1)

Equal-cost multi-path: 0

Destination Options Area Cost Type2 Cost

Next Hop Router Outgoing Interface

*IA 2001:db8:1::/64 --------- 10.0.0.1 0 0

:: ve 10

*E2 2001:db8:2::/64 --------- 0.0.0.0 10 0

fe80::2e0:52ff:fe00:10 ve 10

*IA 2001:db8:4::/64 --------- 0.0.0.0 10 0

:: ve 11

*E2 2001:db8:5::/64 --------- 0.0.0.0 10 0

fe80::2e0:52ff:fe00:10 ve 10

OSPFv3

FastIron Ethernet Switch Layer 3 Routing Configuration Guide

333

53-1003087-04