Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 208)

Field Description
error The number of Error messages sent by the router.
can not send error The number of times the node encountered errors in ICMP error messages.
too freq The number of times the node has exceeded the frequency of sending error messages.
Applies to sent errors only
unreach no route The number of Unreachable No Route errors sent by the router.
admin The number of Admin errors sent by the router.
beyond scope The number of Beyond Scope errors sent by the router.
address The number of Address errors sent by the router.
no port The number of No Port errors sent by the router.
pkt too big The number of Packet Too Big errors sent by the router.
time exceed transit The number of Time Exceed Transit errors sent by the router.
time exceed reassembly The number of Time Exceed Reassembly errors sent by the router.
param problem header The number of Parameter Problem Header errors sent by the router.
nextheader The number of Next Header errors sent by the router.
option The number of Option errors sent by the router.
redirect The number of Redirect errors sent by the router.
unknown The number of Unknown errors sent by the router.
UDP statistics
received The number of UDP packets received by the router.
sent The number of UDP packets sent by the router.
no port The number of UDP packets dropped because the packet did not contain a valid UDP
port number.
input errors This information is used by Brocade Technical Support.
TCP statistics
active opens The number of TCP connections opened by the router by sending a TCP SYN to another
device.
IPv6 Configuration on FastIron X Series, FCX, and ICX Series Switches
208 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04