beautypg.com

Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual

Page 628

background image

total number of vrrp packets sent = 105

backup advertisements sent = 10

The following example displays the output of the show ipv6 vrrp-extended stat ve command:

device# show ipv6 vrrp-extended stat ve 30

Interface ethernet v30

rxed vrrp header error count = 0

rxed vrrp auth error count = 0

rxed vrrp auth passwd mismatch error count = 0

rxed vrrp vrid not found error count = 0

VRID 11

rxed arp packet drop count = 0

rxed ip packet drop count = 0

rxed vrrp port mismatch count = 0

rxed vrrp ip address mismatch count = 0

rxed vrrp hello interval mismatch count = 0

rxed vrrp priority zero from master count = 0

rxed vrrp higher priority count = 0

transitioned to master state count = 2

transitioned to backup state count = 2

total number of vrrp-extended packets received = 0

backup advertisements received = 0

total number of vrrp-extended packets sent = 61

backup advertisements sent = 0

Output field descriptions

TABLE 130

Field

Description

Interface statistics

Interface

The interface on which VRRP or VRRP-E is configured. If VRRP or VRRP-
E is configured on more than one interface, the display lists the statistics
separately for each interface.

rxed vrrp header error count

The number of VRRP or VRRP-E packets received by the interface that
had a header error.

rxed vrrp auth error count

The number of VRRP or VRRP-E packets received by the interface that
had an authentication error.

rxed vrrp auth passwd mismatch
error count

The number of VRRP or VRRP-E packets received by the interface that
had a password value that does not match the password used by the
interface for authentication.

rxed vrrp vrid not found error count

The number of VRRP or VRRP-E packets received by the interface that
contained a VRID that is not configured on this interface.

VRID statistics

rxed arp packet drop count

The number of ARP packets addressed to the VRID that were dropped.

rxed ip packet drop count

The number of IP packets addressed to the VRID that were dropped.

rxed vrrp port mismatch count

The number of packets received that did not match the configuration for the
receiving interface.

rxed vrrp ip address mismatch count The number of packets received that did not match the configured IP

addresses.

rxed vrrp hello interval mismatch
count

The number of packets received that did not match the configured Hello
interval.

VRRP and VRRP-E

628

FastIron Ethernet Switch Layer 3 Routing Configuration Guide

53-1003087-04