Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 627)

show ip vrrp vrid output description (Continued) TABLE 129
Field Description
current dead
interval The current value of the dead interval. This value is equal to the value configured for the
dead interval.
If the value for the dead interval is not configured, then the current dead interval is equal to
three times the Hello interval plus Skew time (where Skew time is equal to 256 minus priority
divided by 256).
NOTE
This field does not apply to VRRP Owners.
preempt mode Whether the backup preempt mode is enabled. If the backup preempt mode is enabled, this
field contains "true". If the mode is disabled, this field contains "false".
advertise backup Whether Backup routers send Hello messages to the Master.
Displaying statistics
You can view VRRP and VRRP-E detailed or summary statistics.
Displaying detailed statistics
Use the stat keyword to display detailed statistics.
The following example displays the output of the show ip vrrp stat ve command:
device# show ip vrrp stat ve 105
Interface ethernet v105
rxed vrrp header error count = 0
rxed vrrp auth error count = 0
rxed vrrp auth passwd mismatch error count = 0
rxed vrrp vrid not found error count = 52
VRID 55
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp number of ip address mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 0
transitioned to master state count = 1
transitioned to backup state count = 1
total number of vrrp packets received = 4
backup advertisements received = 1
total number of vrrp packets sent = 25
backup advertisements sent = 1
VRID 105
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp number of ip address mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 1
transitioned to master state count = 1
transitioned to backup state count = 2
total number of vrrp packets received = 455
backup advertisements received = 0
Displaying statistics
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 627
53-1003087-04