Displaying ipv6 ospf virtual link information, Displaying ospfv3 virtual neighbor information – Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual
Page 371
Displaying IPv6 OSPF virtual link information
To display OSPFv3 virtual link information on a Brocade device, enter the show ipv6 ospf virtual-link
command at any level of the CLI.
device# show ipv6 ospf virtual-link
Transit Area ID Router ID Interface Address State
0.0.0.200 192.168.98.111 5100::192:213:111:213 P2P
Timer intervals(sec) :
Hello 10, Hello Jitter 10, Dead 40, Retransmit 5, TransmitDelay 1
DelayedLSAck: 65 times
Authentication: Not Configured
Statistics:
Type tx rx tx-byte rx-byte
Unknown 0 0 0 0
Hello 819 816 32760 32640
DbDesc 10 11 300 11008
LSReq 6 0 6492 0
LSUpdate 1579 1161 138284 101488
LSAck 65 52 29340 29532
OSPF messages dropped,no authentication: 0
Neighbor: State: Full Address: 5100::192:113:111:111 Interface: e 4/3/1
Syntax: show ipv6 opsf virtual-link
show ipv6 ospf virtual-link output descriptions
TABLE 84
This field
Displays
Index
An index number associated with the virtual link.
Transit Area ID
The ID of the shared area of two ABRs that serves as a connection point between the two
routers.
Router ID
Router ID of the router at the other end of the virtual link (virtual neighbor).
Interface Address The local address used to communicate with the virtual neighbor.
State
The state of the virtual link. Possible states include the following:
• P2P - The link is functioning as a point-to-point interface.
• DOWN - The link is down.
Displaying OSPFv3 virtual neighbor information
To display OSPFv3 virtual neighbor information for the Brocade device, enter the following command at
the enabled level of the CLI.
device#show ipv6 ospf virtual-neighbor
Index Router ID Address State Interface
1 10.14.14.14 2001:db8:44:44::4 Full eth 1/8
Option: 00-00-00 QCount: 0 Timer: 408
2 10.14.14.14 2001:db8:44:44::4 Full tunnel 256
Option: 00-00-00 QCount: 0 Timer: 43
Syntax: show ipv6 ospf virtual-neighbor [brief]
The brief option results in an output that omits the Option, QCount, and Timer fields.
Displaying IPv6 OSPF virtual link information
FastIron Ethernet Switch Layer 3 Routing Configuration Guide
371
53-1003087-04