Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 567)

show ipv6 bgp neighbor advertised-routes detail output descriptions (Continued) TABLE 114
This field... Displays...
AS-PATH The AS-path information for the route.
Adj RIB out count The number of routes in the device’s current BGP4+ Routing Information Base
(Adj-RIB-Out) for a specified neighbor.
Admin distance The administrative distance of the route.
Displaying route flap dampening statistics for a BGP4+ neighbor
To display route flap dampening statistics for a specified BGP4+ neighbor, enter the following command
at any level of the CLI.
device# show ipv6 bgp neighbor 2001:db8::110 flap-statistics
Total number of flapping routes: 14
Status Code >:best d:damped h:history *:valid
Network From Flaps Since Reuse Path
h> 2001:db8::/32 10.90.213.77 1 0 :0 :13 0 :0 :0 65001 4355 1 701
*> 2001:db8::/32 10.90.213.77 1 0 :1 :4 0 :0 :0 65001 4355 701 62
Syntax: show ipv6 bgp neighbor ipv6-address flap-statistics
The ipv6-address parameter displays the route flap dampening statistics for a specified neighbor. You
must specify this address in hexadecimal using 16-bit values between colons as documented in RFC
2373.
show ipv6 bgp neighbor flap-statistics output descriptions TABLE 115
This field... Displays...
Total number of
flapping routes The total number of routes in the neighbor’s BGP4+ route table that have changed state
and thus have been marked as flapping routes.
Status code Indicates the status of the route, which can be one of the following:
• > - This is the best route among those in the neighbor’s BGP4+ route table to the
route’s destination.
• d - This route is currently dampened, and thus unusable.
• h - The route has a history of flapping and is unreachable now.
• * - The route has a history of flapping but is currently usable.
Network The destination network of the route.
From The IPv6 address of the advertising peer.
Flaps The number of flaps (state changes) the route has experienced.
Since The amount of time (in hh:mm:ss) since the first flap of this route.
Reuse The amount of time (in hh:mm:ss) after which the path is again available.
Path The AS path of the route.
Displaying route flap dampening statistics for a BGP4+ neighbor
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 567
53-1003087-04