Displaying ospfv3 spf information – Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual
Page 367
OSPFv3 route information (Continued)
TABLE 81
This field
Displays
E2 Cost
The type 2 cost of this route.
Tag
The route tag for this route.
Flags
Flags associated with this route.
Dis
Administrative Distance for this route.
Next-Hop Router
The IPv6 address of the next router a packet must traverse to reach a
destination.
Outgoing Interface
The router interface through which a packet must traverse to reach the next-
hop router.
Adv_Router
The IP address of the advertising router.
Displaying OSPFv3 SPF information
You can display the following OSPFv3 SPF information:
• SPF node information
• SPF node information for a specified area.
• SPF table for a specified area.
• SPF tree for a specified area.
Enter the command at any level of the CLI to display SPF information in a node.
device# show ipv6 ospf spf node
SPF node for Area 0.0.0.200
SPF node 192.168.98.213, cost: 0, hops: 0
nexthops to node:
parent nodes:
child nodes: 192.168.98.111:136 192.168.98.111:1156
SPF node 192.168.98.111:136, cost: 1, hops: 1
nexthops to node: :: e 4/3/1
parent nodes: 192.168.98.213
child nodes: 192.168.98.111:0
SPF node 192.168.98.111:1156, cost: 1, hops: 1
nexthops to node: :: ve 17
parent nodes: 192.168.98.213
child nodes: 192.168.98.111:0
SPF node 192.168.98.111:0, cost: 1, hops: 2
nexthops to node: fe80::768e:f8ff:fe3e:1800 e 4/3/1
fe80::768e:f8ff:fe3e:1800 ve 17
parent nodes: 192.168.98.111:136 192.168.98.111:1156
child nodes:
SPF node for Area 400
SPF node 192.168.98.213, cost: 0, hops: 0
nexthops to node:
parent nodes:
child nodes:
SPF node for Area 0.0.0.0
SPF node 192.168.98.213, cost: 0, hops: 0
nexthops to node:
parent nodes:
child nodes: 192.168.98.111:0
SPF node 192.168.98.111:0, cost: 1, hops: 1
nexthops to node: 5100::192:113:111:111 VLink 1
parent nodes: 192.168.98.213
Displaying OSPFv3 SPF information
FastIron Ethernet Switch Layer 3 Routing Configuration Guide
367
53-1003087-04