Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 200)

tunnel 6 1/1
C 2001:DB8:46a::/64 ::
ethe 3/2 0/0
C 2001:DB8::1/128 ::
loopback 2 0/0
O 2001:DB8::2/128 fe80::2e0:52ff:fe91:bb37
ethe 3/2 110/1
C 2001:DB8::/64 :: tunnel
2 0/0
Syntax: show ipv6 route [ ipv6-address | ipv6-prefix/prefix-length | bgp | connect | ospf | rip | static
| summary ]
The ipv6-address parameter restricts the display to the entries for the specified IPv6 address. You
must specify the ipv6-address parameter in hexadecimal using 16-bit values between colons as
documented in RFC 2373.
The ipv6-prefix / prefix-length parameters restrict the display to the entries for the specified IPv6 prefix.
You must specify the ipv6-prefix parameter in hexadecimal using 16-bit values between colons as
documented in RFC 2373. You must specify the prefix-length parameter as a decimal value. A slash
mark (/) must follow the ipv6-prefix parameter and precede the prefix-length parameter.
The bgp keyword restricts the display to entries for BGP4 routes.
The connect keyword restricts the display to entries for directly connected interface IPv6 routes.
The ospf keyword restricts the display to entries for OSPFv3 routes.
The rip keyword restricts the display to entries for RIPng routes.
The static keyword restricts the display to entries for static IPv6 routes.
The summary keyword displays a summary of the prefixes and different route types.
The following table lists the information displayed by the show ipv6 route command.
IPv6 route table fields TABLE 37
Field Description
Number of entries The number of entries in the IPv6 route table.
Type The route type, which can be one of the following:
• C - The destination is directly connected to the router.
• S - The route is a static route.
• R - The route is learned from RIPng.
• O - The route is learned from OSPFv3.
• B - The route is learned from BGP4.
IPv6 Prefix The destination network of the route.
Next-Hop Router The next-hop router.
Interface The interface through which this router sends packets to reach the route's destination.
Dis/Metric The route’s administrative distance and metric value.
To display a summary of the IPv6 route table, enter the following command at any CLI level.
device#show ipv6 route summary
IPv6 Routing Table - 7 entries:
IPv6 Configuration on FastIron X Series, FCX, and ICX Series Switches
200 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04