Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 240)

show ipv6 rip output descriptions (Continued) TABLE 53
Field Description
Periodic updates/trigger
updates The number of periodic updates and triggered updates sent by the RIPng Brocade
device.
Distribution lists The inbound and outbound distribution lists applied to RIPng.
Redistribution The types of IPv6 routes redistributed into RIPng. The types can include the
following:
• STATIC - IPv6 static routes are redistributed into RIPng.
• CONNECTED - Directly connected IPv6 networks are redistributed into RIPng.
• BGP - BGP4+ routes are redistributed into RIPng.
• OSPF - OSPFv3 routes are redistributed into RIPng.
Displaying RIPng routing table
To display the RIPng routing table, enter the following command at any CLI level.
device# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
ada::1:1:1:2/128, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 2, tag 0, timers: aging 17
2001:db8::/64, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 3, tag 0, timers: aging 17
bebe::1:1:1:4/128, from ::, null (0)
CONNECTED, metric 1, tag 0, timers: none
cccc::1:1:1:3/128, from fe80::768e:f8ff:fe94:2da, e 2/1/23
RIP, metric 2, tag 0, timers: aging 50
Syntax: show ipv6 rip route [ ipv6-prefix/prefix-length | ipv6-address ]
The ipv6-prefix/prefix-length parameters restrict the display to the entries for the specified IPv6 prefix.
You must specify the ipv6-prefix parameter in hexadecimal using 16-bit values between colons as
documented in RFC 2373. You must specify the prefix-length parameter as a decimal value. A slash
mark (/) must follow the ipv6-prefix parameter and precede the prefix-length parameter.
The ipv6-address parameter restricts the display to the entries for the specified IPv6 address. You
must specify this parameter in hexadecimal using 16-bit values between colons as documented in
RFC 2373.
show ipv6 rip route output descriptions TABLE 54
Field Description
IPv6 RIP Routing Table
entries The total number of entries in the RIPng routing table.
ipv6-prefix /prefix-length
ipv6-address
The IPv6 prefix and prefix length.
The IPv6 address.
Next-hop router The next-hop router for this Brocade device. If :: appears, the route is originated
locally.
Displaying RIPng routing table
240 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04