Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 306)

show ip ospf routes output descriptions (Continued) TABLE 62
This field Displays
Tag The external route tag.
Flags State information for the route entry. This information is used by Brocade technical support.
Paths The number of paths to the destination.
Out_Port The router port through which the device reaches the next hop for this route path.
Next_Hop The IP address of the next-hop router for this path.
Type The route type, which can be one of the following:
• ‐ OSPF
‐ Static Replaced by OSPF
State State information for the path. This information is used by Brocade technical support.
Displaying the routes that have been redistributed into OSPF
You can display the routes that have been redistributed into OSPF. To display the redistributed routes,
enter the following command at any level of the CLI.
device# show ip ospf redistribute route
4.3.0.0 255.255.0.0 static
3.1.0.0 255.255.0.0 static
10.11.61.0 255.255.255.0 connected
4.1.0.0 255.255.0.0 static
In this example, four routes have been redistributed. Three of the routes were redistributed from static
IP routes and one route was redistributed from a directly connected IP route.
Syntax: show ip ospf redistribute route [ ip-addr ip-mask ]
The ip-addr ip-mask parameter specifies a network prefix and network mask. Here is an example.
Brocade#show ip ospf redistribute route 192.213.1.0 255.255.255.254
192.213.1.0 255.255.255.254 fwd 0.0.0.0 (0) metric 10 connected
Displaying OSPF database information
The following command displays the OSPF database.
device#show ip ospf database
Index Area ID Type LS ID Adv
Rtr Seq(Hex) Age Cksum SyncState
1 0.0.0.200 Rtr 192.168.98.111 192.168.98.111 8000003b 626 0xf885
Done
2 0.0.0.200 Rtr 192.168.98.213 192.168.98.213 800000c9 963 0x209c
Done
3 0.0.0.200 Rtr 192.168.98.113 192.168.98.113 80000028 169 0x0275
Done
4 0.0.0.200 Rtr 192.168.98.112 192.168.98.112 8000002d 226 0x1c03
Done
5 0.0.0.200 Net 193.113.111.113 192.168.98.113 8000001f 1132 0x353d
Displaying the routes that have been redistributed into OSPF
306 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04