Displaying the dhcpv6 relay agent options – Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual
Page 215
Output from the show ipv6 dhcp-relay delegated-prefixes command (Continued)
TABLE 44
Field
Description
Client
The IPv6 address of the client.
Interface
The interface on which the DHCPv6 messages are relayed to the client.
ExpireTime
The remaining lifetime of the delegated prefix.
Displaying the DHCPv6 Relay configured destinations
Enter the show ipv6 dhcp-relay destinations command to display information about the delegated
prefixes’ configured destinations for a specific interface.
device#show ipv6 dhcp-relay destinations
DHCPv6 Relay Destinations:
Interface ve 100:
Destination OutgoingInterface
2001:db8:1::39 NA
Interface ve 101:
Destination OutgoingInterface
2001:db8:1::39 NA
Interface ve 102:
Destination OutgoingInterface
2001:db8:1::39 NA
Syntax: show ipv6 dhcp-relay destinations
describes the fields from the output of show ipv6 dhcp-relay destinations command.
Output from the show ipv6 dhcp-relay destinations command
TABLE 45
Field
Description
Destination
The configured destination IPv6 address.
OutgoingInterface The interface on which packets will be relayed if the destination relay address is local link or
multicast.
Displaying the DHCPv6 Relay Agent options
Enter the show ipv6 dhcp-relay options command to display information about the relay options
available to the prefixed delegates for a specific interface.
device# show ipv6 dhcp-relay options
DHCPv6 Relay Options Information:
Interface Interface-Id Remote-Id
ve 100 No No
ve 101 Yes No
ve 102 No Yes
Syntax: show ipv6 dhcp-relay options
describes the fields from the output of show ipv6 dhcp-relay options command.
Displaying the DHCPv6 Relay configured destinations
FastIron Ethernet Switch Layer 3 Routing Configuration Guide
215
53-1003087-04