beautypg.com

Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide User Manual

Page 305

background image

10.65.0.0 255.255.0.0 0 0 Inter

Adv_Router Link_State Dest_Type State Tag Flags

10.1.10.1 0.0.0.0 Network Valid 0 0000

Paths Out_Port Next_Hop Type State

1 1/1 0.0.0.0 DIRECT 00 00

OSPF Regular Routes 208:

Destination Mask Path_Cost Type2_Cost Path_Type

10.1.10.0 255.255.255.252 1 0 Intra

Adv_Router Link_State Dest_Type State Tag Flags

10.1.10.1 10.1.10.2 Network Valid 0 0000

Paths Out_Port Next_Hop Type State

1 v10 0.0.0.0 OSPF 00 00

Destination Mask Path_Cost Type2_Cost Path_Type

10.1.11.0 255.255.255.252 1 0 Intra

Adv_Router Link_State Dest_Type State Tag Flags

10.1.10.1 10.1.11.2 Network Valid 0 0000

Paths Out_Port Next_Hop Type State

1 v11 0.0.0.0 OSPF 00 00

Syntax: show ip ospf routes [ ip-addr ]

The ip-addr parameter specifies a destination IP address. If you use this parameter, only the route
entries for that destination are shown.

show ip ospf routes output descriptions

TABLE 62

This field

Displays

Destination

The IP address of the route's destination.

Mask

The network mask for the route.

Path_Cost

The cost of this route path. (A route can have multiple paths. Each path represents a different exit
port for the device.)

Type2_Cost The type 2 cost of this path.

Path_Type

The type of path, which can be one of the following:

Inter - The path to the destination passes into another area.

Intra - The path to the destination is entirely within the local area.

External1 - The path to the destination is a type 1 external route.

External2 - The path to the destination is a type 2 external route.

Adv_Router The OSPF router that advertised the route to this device.

Link-State

The link state from which the route was calculated.

Dest_Type

The destination type, which can be one of the following:

ABR - Area Border Router

ASBR - Autonomous System Boundary Router

Network - the network

State

The route state, which can be one of the following:

Changed

Invalid

Valid

This information is used by Brocade technical support.

OSPFv2

FastIron Ethernet Switch Layer 3 Routing Configuration Guide

305

53-1003087-04