Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 571)

show ipv6 bgp neighbor received-routes detail output descriptions TABLE 118
This field... Displays...
Number of BGP4+
routes received from a
neighbor For information about this field, refer to the table above.
Status codes For information about this field, refer to the table above.
Prefix For information about this field, refer to the table above.
Status For information about this field, refer to the table above.
Age The age of the route, in seconds.
Next hop The next-hop router for reaching the route from the device.
Learned from peer The IPv6 address of the neighbor from which this route is learned. "Local Router"
indicates that the device itself learned the route.
Local pref For information about this field, refer to the table above.
MED The value of the route’s MED attribute. If the route does not have a metric, this field is
blank.
Origin The source of the route information. The origin can be one of the following:
• EGP - The routes with this set of attributes came to BGP4+ through EGP.
• IGP - The routes with this set of attributes came to BGP4+ through IGP.
• INCOMPLETE - The routes came from an origin other than one of the above. For
example, they may have been redistributed from OSPFv3 or RIPng.
When BGP4+ compares multiple routes to a destination to select the best route, IGP is
preferred over EGP and both are preferred over INCOMPLETE.
Weight For information about this field, refer to the table above.
AS Path For information about this field, refer to the table above.
Adj RIB out count The number of routes in the device’s current BGP4+ Routing Information Base (Adj-RIB-
Out) for a specified neighbor.
Admin distance The administrative distance of the route.
Displaying the Adj-RIB-Out for a BGP4+ neighbor
You can display a summary or detailed information about the following:
• All routes in a device’s current BGP4+ Routing Information Base (Adj-RIB-Out) for a specified
neighbor.
• A specified route in a device’s current BGP4+ RIB for a specified neighbor.
Displaying the Adj-RIB-Out for a BGP4+ neighbor
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 571
53-1003087-04