Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 498)

show ip bgp route output descriptions (Continued) TABLE 99
This field Displays
LocPrf The degree of preference for this route relative to other routes in the local AS. When the BGP4
algorithm compares routes on the basis of local preferences, the route with the higher local
preference is chosen. The preference can have a value from 0 - 4294967295.
Weight The value that this device associates with routes from a specific neighbor. For example, if the
device receives routes to the same destination from two BGP4 neighbors, the device prefers the
route from the neighbor with the larger weight.
Path The route AS path.
NOTE
This field appears only if you do not enter the route option.
Origin code A character that indicates the route origin. The origin code appears to the right of the AS path
(Path field). The origin codes are described in the command output.
NOTE
This field appears only if you do not enter the route option.
Configuring BGP4 (IPv4)
498 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04