Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 577)

show ipv6 bgp neighbor routes detail bestoutput descriptions (Continued) TABLE 122
This field... Displays...
Status codes For information about this field, refer to the table above.
Prefix For information about this field, refer to the table above.
Status For information about this field, refer to the table above.
Age The age of the route, in seconds.
Next Hop For information about this field, refer to the table above.
Learned from Peer The IPv6 address of the neighbor from which this route is learned. "Local Router"
indicates that the device itself learned the route.
LOCAL_PREF For information about this field, refer to the table above.
MED The value of the RIB route’s MED attribute. If the route does not have a metric,
this field is blank.
Origin The source of the route information. The origin can be one of the following:
• EGP - The routes with this set of attributes came to BGP4+ through EGP.
• IGP - The routes with this set of attributes came to BGP4+ through IGP.
• INCOMPLETE - The routes came from an origin other than one of the above.
For example, they may have been redistributed from OSPFv3 or RIPng.
When BGP4+ compares multiple routes to a destination to select the best route,
IGP is preferred over EGP and both are preferred over INCOMPLETE.
Weight For information about this field, refer to the table above.
AS-PATH For information about this field, refer to the table above.
Displaying IPv6 neighbor route summary information
You can display route summary information for all neighbors or a specified neighbor only.
For example, to display summary information for neighbor 2001:db8::110, enter the following command
at any level of the CLI.
device# show ipv6 bgp neighbor 2001:db8::110 routes-summary
1 IP Address: 2001:db8::110
Routes Accepted/Installed:0, Filtered/Kept:0, Filtered:0
Routes Selected as BEST Routes:0
BEST Routes not Installed in IP Forwarding Table:0
Unreachable Routes (no IGP Route for NEXTHOP):0
History Routes:0
NLRIs Received in Update Message:0, Withdraws:0 (0), Replacements:0
NLRIs Discarded due to
Maximum Prefix Limit:0, AS Loop:0
Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0
Invalid Confed aspath:0, maxas-limit aspath:0
Duplicated Originator_ID:0, Cluster_ID:0
Routes Advertised:2, To be Sent:0, To be Withdrawn:0
NLRIs Sent in Update Message:2, Withdraws:0, Replacements:0
Peer Out of Memory Count for:
Displaying IPv6 neighbor route summary information
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 577
53-1003087-04