Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 545)

LOCAL_PREF: 400, MED: 0, ORIGIN: incomplete, Weight: 0
AS_PATH: 65005 65010
Adj_RIB_out count: 1, Admin distance 200
4 Prefix: 2001:db8:400:400::/64, Status: BL, Age: 5h43m14s
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 0, ORIGIN: igp, Weight: 32768
AS_PATH:
Adj_RIB_out count: 3, Admin distance 1
show ipv6 bgp route detail output descriptions TABLE 105
Field Description
Number of BGP4+
Routes advertised to
specified neighbor
(appears only in display
for all routes) For information about this field, refer to Displaying BGP4+ route information on page
547.
Status codes For information about this field, refer to Displaying BGP4+ route information on page
547.
Prefix For information about this field, refer to Displaying BGP4+ route information on page
547.
Status For information about this field, refer to Displaying BGP4+ route information on page
547.
Age The age of the advertised route, in seconds.
Next Hop For information about this field, refer to Displaying BGP4+ route information on page
547.
Learned from Peer The IPv6 address of the neighbor from which this route is learned. "Local Router"
indicates that the device itself learned the route.
LOCAL_PREF For information about this field, refer to Displaying BGP4+ route information on page
547.
MED The value of the advertised route’s MED attribute. If the route does not have a metric,
this field is blank.
Configuring BGP4+
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 545
53-1003087-04