FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 8)

vi SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
2.1.3 SPARC Enterprise M9000 Server (Expansion Cabinet) 2–9
2.2 Labels 2–11
2.2.1 System Name Plate Label, Rating Label, ID Label (Japan) or EZ
Label (besides Japan), and Standard Label
2–11
2.2.2 Labels About Handling 2–15
2.3 Operator Panel 2–16
2.3.1 Operator Panel Location 2–16
2.3.2 Appearance and Operations 2–17
2.3.3 LED 2–18
2.3.4 Switch 2–20
2.4 Determining Which Diagnostics Methods To Use 2–21
2.5 Checking the Server and System Configuration 2–23
2.5.1 Checking the Hardware Configuration and FRU Status 2–23
2.5.1.1 Checking the Hardware Configuration 2–24
2.5.2 Checking the Software and XSCF Firmware Configurations 2–24
2.5.2.1 Checking the Software Configuration 2–25
2.5.2.2 Checking the Firmware Configuration 2–26
2.5.3 Downloading the Error Log Information 2–26
2.6 Error Conditions and Action To Be Taken 2–26
2.6.1 Predictive Self-Healing Tools 2–27
2.6.2 Monitoring Output 2–28
2.6.3 Messaging Output 2–29
2.7 LED Error Display 2–30
2.7.1 When target FRU is indicated by LEDs 2–31
2.7.2 When target FRU is not indicated by LEDs 2–31
2.8 Using the Troubleshooting Commands 2–34
2.8.1 Using the showlogs Command 2–34
2.8.2 Using the fmdump Command 2–35
2.8.3 Using the fmadm Command 2–35