FUJITSU SPARC ENTERPRISE M8000 User Manual

Page 419

Chapter 24

Addition and Deletion of a RDPF Option, Power Cabinet, and M9000 Expansion Cabinet

24-5

c. Remove the connector panel (together with a thumb screw) of the M8000,

and mount it (with a thumb screw) on the mounting bracket from the
installation kit.

d. Mount the mounting bracket on the M8000 (with four screws, at the

mounting location of the covering panel).

e. Mount the cage nuts from the installation kit on the two poles (two for each

pole) at the rear of the equipment rack of the M8000.

FIGURE 24-2

Mounting Locations of cage Nuts

f. Mount the dual power feed unit at the front of the equipment rack of the

M8000.