FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 453)

Appendix B Components B-7
B.3 Memory
The type of memory used is DIMM.
FIGURE B-3 shows the memory.
FIGURE B-3 Memory
The memory has the following characteristics.
■ Active maintenance of memory is possible using the DR function.
■ Maintenance or installation of a DIMM module involves removing or installing a
CMU.
■ The category of the DIMM as specified by capacity and type is as follows:
■
DIMM-1GB
■
DIMM-2GB
■
DIMM-4GB
■ DIMM-8GB
■ Depending on the DIMMs used, the label format of component numbers and
serial numbers differs.