FUJITSU SPARC ENTERPRISE M8000 User Manual

Page 468

Text mode
Original mode

B-22

SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009

FIGURE B-16

Rear View of the Operator Panel (OPNL)

OPNL has the following characteristics.

■

Only cold replacement is available for the OPNL.

■

The following switches are mounted on the OPNL to enable operation of the
server.

■

POWER switch to turn on the power.

■

Mode switch to control the POWER switch

■

The LED on the front of the OPNL displays the condition of the server. The LED
of the rear of the OPNL displays the status of OPNL itself.

■

On OPNL, EEPROM is mounted to store the device identification information and
the user setting information. These sets of information are also stored in XSCFU.

■

The OPNL has a label bearing the printed component number and manufacture's
serial number.