FUJITSU SPARC ENTERPRISE M8000 User Manual
FUJITSU Computers
Table of contents
Document Outline
- SPARC Enterprise™ M8000/M9000 Servers Service Manual
- Contents
- Preface
- I Basic Information for Maintenance and Troubleshooting
- Safety and Tools
- Product Overview and Troubleshooting
- Periodic Maintenance
- FRU Removal Preparation
- 4.1 Types of Replacement Procedures
- 4.2 Active Replacement
- 4.3 Hot Replacement
- 4.4 Cold Replacement
- 4.5 Power-On/Off of Main Line Switch
- 4.5.1 Types of Power Supply
- 4.5.2 Power-On/Off Procedures of Main Line Switch
- 4.5.3 Main Line Switch Locations
- 4.5.3.1 SPARC Enterprise M8000 Server Single-Phase Power Feed
- 4.5.3.2 SPARC Enterprise M8000 Server Single-Phase and Dual Power Feed
- 4.5.3.3 SPARC Enterprise M8000 Server Three-Phase Power Feed
- 4.5.3.4 SPARC Enterprise M9000 Server Single-Phase Power Feed
- 4.5.3.5 SPARC Enterprise M9000 Server Single-Phase and Dual Power Feed
- 4.5.3.6 SPARC Enterprise M9000 Server Three-Phase Power Feed
- 4.6 Emergency Switch-Off
- 4.7 Cable Routing of the SPARC Enterprise M8000 Server
- II Maintenance
- Internal Components Access
- Replacement of CPU/Memory Board Unit (CMU), CPU, and DIMM
- I/O Unit (IOU) Replacement
- FAN Unit Replacement
- Power Supply Unit (PSU) Replacement
- Operator Panel Replacement
- XSCF Unit Replacement
- Hard Disk Drive (HDD) Replacement
- PCI Slot Device Replacement
- CD-RW/DVD-RW Drive Unit Replacement
- Tape Drive Unit Replacement
- Clock Control Unit Replacement
- Crossbar Unit Replacement
- AC Section Replacement
- DDC Replacement
- Backplane Replacement
- Sensor Unit Replacement
- Media Backplane Replacement
- Switch Backplane Replacement
- Addition and Deletion of a RDPF Option, Power Cabinet, and M9000 Expansion Cabinet
- Addition and Deletion of CMU, DIMM, IOU, HDD, PCI Cards and TAPEU
- System Configuration
- Components
- B.1 CPU Memory Board Unit
- B.2 CPU Module
- B.3 Memory
- B.4 I/O Unit
- B.5 Hard Disk Drive
- B.6 PCI Cassette
- B.7 IOU Onboard Device Card
- B.8 Link Card (External I/O Expansion Unit Connection Card)
- B.9 Crossbar Unit
- B.10 Clock Control Unit
- B.11 XSCF Unit
- B.12 CD-RW/DVD-RW Drive Unit
- B.13 Tape Drive Unit
- B.14 Operator Panel
- B.15 Sensor Unit
- B.16 Power Supply Unit
- B.17 AC Section
- B.18 FAN Unit
- B.19 Power Cabinet
- B.20 Rack-mountable Dual Power Feed
- B.21 Backplane
- B.22 DDC
- B.23 PSU Backplane
- B.24 FAN Backplane
- B.25 Media Backplane
- B.26 Switch Backplane
- External Interface Specifications
- UPS Controller
- XSCF Unit Replacement When XCP 1040 or 1041 Is in the Server
- Abbreviations
- Index