FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 35)

Chapter 1 Safety and Tools 1-3
1.1.3 Environmental Requirements for Using This
Product
This product is a computer that is intended to be used in a computer room. For
details on the operational environment, see the SPARC Enterprise M8000/M9000
Servers Site Planning Guide.
1.1.4 Conventions for Alert Messages
This manual uses the following conventions to show alert messages, which are
intended to prevent injury to the user or bystanders as well as property damage, and
important messages that are useful to the user.
1.1.4.1 Alert Messages in the Text
An alert message in the text consists of a signal indicating an alert level followed by
an alert statement. Alert messages are indented to distinguish them from regular text
as shown in the following example. Also, a space of one line precedes and follows an
alert statement.
The tasks listed below for this product and optional product provided by Fujitsu
should be performed only by authorized service personnel.
The user must not perform these tasks. Incorrect operation of these tasks may cause
electric shock, injury, or fire.
■ Installation and reinstallation of all components
■ Removal of front, rear, or side covers
■ Mounting/unmounting of optional internal devices
■ Connecting/disconnecting of external interface cables
■ Maintenance (repair and regular diagnosis and maintenance)
This indicates a hazardous situation that could result in death or serious
personal injury (potential hazard) if the user does not perform the
procedure correctly.
This indicates a hazardous situation that could result in minor or moderate
personal injury if the user does not perform the procedure correctly. This
signal also indicates that damage to the product or other property may
occur if the user does not perform the procedure correctly.
This indicates information that could help the user to use the product more
effectively.