FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 491)

C-1
C H A P T E R
C
External Interface Specifications
This appendix describes the specifications of the connectors provided on the SPARC
Enterprise server unit:
■ “Serial Port” on page 1
■ “UPC Port” on page 2
■ “USB Port” on page 2
■ “Connection Diagram for Serial Cable” on page 3
C.1 Serial Port
TABLE C-1 Serial Port
Setting Pin No> Signal name Input/output Description
1 RTS Output Request to Send
2 DTR Output Data Terminal Ready
3 TXD Output Send Data
4 GND — Ground
5 GND — Ground
6 RXD Input Receive Data
7 DSR Input Data Set Ready
8 CTS Input Clear to Send
12 4 6 8 3 5 7