FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 36)

1-4 SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
1.2 Precautions
The following notes must be observed in maintenance work:
1.2.1 Operating Environment of the Product
Use the SPARC Enterprise in the correct operating environment. The SPARC
Enterprise are assumed to be used in a computer room. For details of the operating
environment, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.
1.2.2 Maintenance
The work listed below is to be performed by authorized service engineers. Persons
who are not authorized service engineers must not perform the work. Otherwise,
electric shock, injury, or fire may result.
■ Installation, transport, and initial setup of each device
■ Removal of the front, rear, or a side cover.
■ Mounting or removing internal optional components
■ Connecting or disconnecting an external interface cable
■ Maintenance (repair, regular diagnosis, and maintenance)
The work listed below is to be performed by authorized service engineers. Persons
who are not authorized service engineers must not perform the work. Otherwise, an
equipment failure may result.
■ Unpacking or installing products, such as an optional adapter, that are delivered
to the customer
■ Connecting or disconnecting an external interface cable