FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 343)

Chapter 18 AC Section Replacement 18-7
c. Remove the power cables.
Caution – When removing power cables, switch off the main line switches. The
power cord must be removed by a qualified worker. Ask a system administrator.
d. Loosen the knob screws on the AC section, and pull out the AC section
while lifting the two levers.
e. With the AC section pulled out partially, grasp the front and top handles and
remove the AC section.
FIGURE 18-4 Removing the AC Section (Rear of the M8000)
1
2
1