FUJITSU SPARC ENTERPRISE M8000 User Manual
Page 176
6-24
SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
Note –
Mount the dummy (filler) unit in the same manner as CMU. Since the same
levers are used on the dummy (filler) unit, please operate the eject/lock levers in the
same manner.
Caution –
Do not forcibly push the CMU when inserting it, even if it is not moving
smoothly. If the CMU is forcibly inserted despite the presence of any obstruction in
a slot or any problem with a connector pin, serious damage may result.
15. Switch on all main line switches for the AC section (ACS) in the power supply
system.
16. Confirm that the XSCF STANDBY LED (green) on the operator panel remains
lit. If it is blinking, wait until it remains lit.
17. Start (turn on power) all domains together. Take either of the following two
actions:
■
Press and hold down (for less than four seconds) the POWER switch on the
operator panel.
■
From the console that is connected to XSCF, execute the
poweron -d <
domain-id> command of XSCF for the domain of the swap
target new CMU.
Power to all the domains is turned on. Firmware version synchronization of the
target domain is automatically performed.
For details of the power-on operation, see
Section 4.4.2, “Powering the Server On”
, and the SPARC Enterprise M3000/M4000/M5000/M8000/M9000
Servers XSCF User’s Guide.
18. Using the XSCF version command, confirm that the firmware version of the
target domain is the same in the replacement CMU.
For details of firmware version synchronization, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.
19. Confirm that the replacement components are normal by using the
showhardconf
or showstatus command of XSCF.
Unless "*" is displayed for a replacement CMU, CPU, or DIMM, it is operating
normally.
For details of the showhardconf command and showstatus command, see the
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide,
the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference
Manual, or the man page.