FUJITSU BX900 S1 User Manual
Primergy bx900 s1 blade server
Table of contents
Document Outline
- Contents
- 1 Introduction
- 2 Installation steps, overview
- 3 Important notes
- 4 Installing the hardware
- 5 Installation and operation
- 6 Property and data protection
- 7 Troubleshooting and tips
- 7.1 System power indicator does not light up
- 7.2 Front or back error LED flashes orange
- 7.3 System switches itself off
- 7.4 Screen remains blank
- 7.5 Flickering stripes on monitor screen
- 7.6 No screen display or display drifts
- 7.7 No mouse pointer displayed on screen
- 7.8 Incorrect date and time
- 7.9 Server blade does not boot
- 7.10 Defective drive
- 8 Hot-plug components
- 8.1 Server blades and storage blades
- 8.2 Connection blades
- 8.2.1 Connection Blade GbE Switch/IBP 36/12 SB11A
- 8.2.2 Connection Blade GbE Switch/IBP 36/8+2 SB11
- 8.2.3 Connection Blade 10 GbE Switch/IBP 18/8
- 8.2.4 Connection Blade 8Gb FC Switch 18/8
- 8.2.5 Connection Blade Ethernet Pass Thru 10Gb 18/18
- 8.2.6 Connection Blade 8Gb FC Pass Thru 18/18
- 8.2.7 Connection Blade Infiniband Switch 40 Gb 18/18
- 8.2.8 Connection Blade GbE Switch/IBP 18/6 SB6
- 8.2.9 Connection Blade SAS Switch 6 Gb 18/6
- 8.2.10 Fitting rules for connection blades
- 8.2.11 Port assignment of the connection blades
- 8.2.12 Installing a connection blade
- 8.3 Management blades
- 8.4 Hot-plug power supply units
- 8.5 Hot-plug fan modules
- Index