Grass Valley LVS 100 v.3.15 - Manual (Page 94)

System Configuration and Startup
3-4
Profile LVS Event Management System Instruction Manual
There are three buttons at the bottom of the window. The function of each button
is as follows:
Clear 
Clears all the assignment of resources. To be used for re–assigning
resources.
Cancel 
Terminates the Configuration Window by aborting the assignments of
resources modified. In other words, it returns the system to the state where no
changes to resource assignment has been made.
OK 
Defines the resource assignment set on each tab and the system is
prepared to start with the displayed settings.
ACG.. Press the OK button only after completing the settings for Resource
Assign, Resource Setup, Video Routing and Other tabs in the Configuration
Window. Failure to do this or an incorrect setting may cause the system to halt.
When the OK button is pressed, a message Delete the previous scenes or
highlights? is displayed. If you wish to delete all the previous scenes and
highlights, press the Yes button (the scenes stored in the library will not be
deleted). If you want to continue operation without deleting the previous scenes
or highlights, press the No button.
Refer to Starting Operation on page 3–25 for information on operational
restrictions if you choose to not delete previous scenes and highlights.
For further information on a scene and highlight, refer to Scene Window on
page 4–21 and Highlight Window on page 4–25.
Buttons