Grass Valley LVS 100 v.3.15 - Manual (Page 72)

Tutorial
2-16
Profile LVS Event Management System Instruction Manual
Record and SlowĆmotion Play
System setup procedures have been completed and you are ready for record and
slow–motion play functions. In the following descriptions, a Live Controller is
used. For further information on the Live Controller, refer to Live Controller on
page 6–1.
MARK, ENTER/CUE UPĂ, REC buttons:
Used to create and record a scene.
REC STOP button: Halts recording.
Lever and VAR button:
Used in slow-motion play.
Figure 2-15: Live Controller
Before creating a scene, make sure that the Scene Window[A] as shown in
Figure 2–17 is displayed. If not, click on the button labeled SA in the Command
Launcher. This is called Scene Window[A] button or just Scene button. When
you click on this button again, the window closes.
Note that scenes can be created even if the Scene window is closed.
First, begin to record. Press the REC button on the Live Controller. Recording
has started if the REC button illuminates.
Recording is stopped by pressing SHIFT + REC/STOP button. When recording
is stopped, the REC button is extinguished. The operations described in the
following sections are not available if a recording is not performed. Press the
REC button again to restart recording.
Start recording
Stop recording