Grass Valley LVS 100 v.3.15 - Manual (Page 175)

Playlist Window with Mix-effect
Profile LVS Event Management System Instruction Manual
4-57
Mix Effect over Multiple Events
Mix effects can be set on individual events, but they can also be applied to a
group of events.
1. Check the Range Select option.
2. Click on the first event of the group you want to set, then drag to the end of
the last event of the group. The selected events are highlighted, and the
Event No indicates the range from first to the last event in the group.
3. Enter number of frames for mix effect in the Effect Duration text box.
4. Click on the Mix Effect Video and/or Audio option.
5. Select the type of the video effect in Effect Patterns.
6. Click on the Set button to make settings effective. Then clear the Range
Select option.
Note that the mix effect setting is ignored when the first event in the playlist is
included in the group you want to set.
ACG.. Do not assign the mix effect resource as channel A (the first source).
When applying a cross fade to the audio, be sure to set an audio bank for the mix
effect resources which are found on the Resource Setup tab in the Configuration
Window. If it is not set, no cross fade is applied.