Grass Valley LVS 100 v.3.15 - Manual (Page 291)

Profile LVS Event Management System Instruction Manual
9-1
Maintenance
This section contains information about periodic and corrective maintenance on
the Live Controller. It includes the following subsections:
H Preparation. This subsection includes general information on preventing
damage to internal modules when doing maintenance. See the following
subsection.
H Inspection and Cleaning. Information and procedures for inspecting the
Live Controller and cleaning its external and internal modules. See
page 9–2.
H Removal and Installation Procedures. Procedures for removing and
installing modules. See page 9–5.
H Repacking. Information on packaging the Live Controller properly for
shipment. See page 9–23.
H Diagnostics. Information for operating the Live Controller internal
diagnostic routines. See page 9–25.
H Troubleshooting. Information for isolating failed modules, including a fault
isolation troubleshooting table. Most of the table makes use of the internal
diagnostic routine to speed fault isolation to a module. See page 9–33.
Preparation
Before performing any of the procedures in the Maintenance section, note the
following:
H Only trained service technicians should perform these procedures.
H Read the General Safety Summary beginning on page xv near the beginning
of this manual and the Service Safety Summary beginning on page s-i.
H Read the Strategy for Servicing on page s-iii.
H Read the section called Operating Information, starting on page 7–1, before
servicing the Live Controller.