Grass Valley LVS 100 v.3.15 - Manual (Page 58)

Tutorial
2-2
Profile LVS Event Management System Instruction Manual
System Startup
System startup is as follows:
1. Turn on the Live Controller, the monitor and all related equipment connected
to the Profile system.
2. Turn on the power for the Profile system. (The main power switch is located
on the rear panel of the Profile chassis, and the Standby/Power On switch is
on the lower right corner of the front panel. During operation, the power can
be turned on or off using the Standby/Power On switch on the front panel.)
When the power is turned on, Windows NT is automatically started, and then
LVSStart.exe (LVS software) is also automatically started. Depending on the
configuration, the time required for starting up the system varies from 5 to 10
minutes from initial power–up.
Startup procedure is completed when the Main Window of the Event Manage-
ment System (LVS) appears. See Figure 2–1.
Figure 2-1: Main Window