Grass Valley LVS 100 v.3.15 User Manual
Page 184
Timeline Window
4-66
Profile LVS Event Management System Instruction Manual
An event’s IN and OUT points can be changed with the Preview or Scene
Information windows, or with the Live Controller.
1. Select a mode, Advanced or Non-advanced, by clicking the ADV. button.
Refer to page 4–76 for the more information on the Advanced mode.
2. Adjust the event’s IN and OUT points using one of the following methods:
D The Preview Window, described in Preview Window on page 5–12.
D The Scene Information window, described in Scene Information Window
on page 5–21.
D The Live Controller, described in Edit Area on page 6–12.
To edit with the Live Controller, use the Event mode to search for an
event, then change its IN and OUT points. Using this method, you can
shorten the duration, but not lengthen it.
Audio slip changes the IN and OUT points of an event without changing the
duration.
For example, when you set the audio slip value to 10 frames, the IN point and
the OUT point will be set to the points 10 frames after the current IN and OUT
points, respectively. This is very effective when audio and video have been split
from each other.
Refer to Editing Event Duration for more details on settings.
Usually, when you play back video at slow-motion speed, the audio is also
played back at the same speed. In Audio Split mode, however, video can be
played back at slow-motion speed and the audio can be played back independent-
ly at normal speed. In this mode, operations such as slow-motion play affect only
one of the tracks; audio or video. You do not have to use and additional resource
(codec) to play back audio at normal speed.
There are two ways to set the playback speed. You can use the Preview Window
or the Scene Information Window.
For details on setting the playback speed with Preview Window, refer to Preview
Window on page 5–12.
For details on setting the playback speed with Scene Information Window, refer
to Scene Information Window on page 5–21.
You can set fade in, fade out, track swapping and splits for each event. Set them
in the Preview window, or in the Scene Information window.
Editing Event Duration
Audio Slip
Playback Speed
Fade In / Fade Out