Grass Valley LVS 100 v.3.15 - Manual (Page 250)

Live Controller
6-6
Profile LVS Event Management System Instruction Manual
Using the buttons in the PLAY area, the operator controls the Profile transport
functions. You can switch the Playback mode between continuous play and Step
mode, including Play, Stop, Shuttle, Jog, and Variable speed playback (with the
T-bar control).
Figure 6-5: Buttons in PLAY Area
PLAY 
Plays the selected scene.
STOP 
Stops playing.
When the Controller Window is set to E–E, input video is looped through to the
output. When the setting is PB, a video freeze is output. For setting the E–E or
PB mode, refer to Monitor Mode on page 4–18.
If you press the STOP button and the SHIFT button, the system is temporarily
set to the E–E mode, and input video is looped through to the output. When any
play operation is executed later, this temporary E–E mode is reset. This function
is helpful when you want to temporarily refer to input video while the monitor
mode is set to PB in the Controller Window.
SHTL 
Enables the Jog/Shuttle knob for shuttle operation. See page 6–8 for
additional information.
JOG 
Enables the Jog/Shuttle knob for jog operation. See page 6–8 for
additional information.
PLAY Area