Slow motion lever – Grass Valley LVS 100 v.3.15 User Manual
Page 253

Live Controller
Profile LVS Event Management System Instruction Manual
6-9
Slow Motion Lever
Figure 6-7: Slow Motion Lever (TĆbar)
Slow Motion Lever
Allows you to vary playback speed between 0.0 (still) and
+1.0 (normal play) depending to the angle of the lever. The lever has stops at
points 0.0 and +1.0.
The locks are released by using the button located on either side of the lever.
This permits further travel of the lever, giving the operator precise control of
playback speeds in either: Reverse (from 0 to –3.0), then in Shuttle to the
maximum Shuttle speed; or in Forward (from 0 to +3.0), then in Shuttle to the
maximum Shuttle speed. (Maximum Shuttle speed is set on the Other tab of the
Configuration Window.) The lever is tensioned to give positive control to the
operator.
ACG.. The values for Max Shuttle Speed can be freely set ("1 to "50). Set
these values in the Other tab of the Configuration Window. For details, refer to
Max Shuttle Speed
on page 3–18.