Grass Valley LVS 100 v.3.15 - Manual (Page 23)

Profile LVS Event Management System Instruction Manual
xix
About This Manual
This instruction manual covers the Profile LVS Event Management System
(Basic and Enhanced Feature Set) and the LVS Live Controller.
The LVS Event Management System and the Profile

professional disk recorder
(Profile) utilize software based on Windows NT TM . However, this manual does
not describe Windows NT operations. If you are not familiar with those
operations, please refer to Windows NT documentation prior to operating this
product.
This manual consists of the following:
H Section 1 Getting Started 
Describes the system configurations, and
software/hardware installation.
H Section 2 Tutorial 
Describes basic operating procedures, including
system start up, system setup, operation and system shut down. By going
through these procedures from the beginning to the end, you can quickly
learn the basic operations of the system.
H Section 3 System Configuration and Startup 
The system is designed to
be operated after various configuration parameters have been set up. This
sub–section describes the set up and start up of the system.
H Section 4 Operating the System 
After the system is configured and
started, you can operate the system using the Graphical User Interface (GUI)
displayed on the screen and/or using the Live Controller. This section
describes the function of the windows essential for GUI system operation.
H Section 5 Set and Edit Applications 
Describes the operations and
functions of the windows that assist the essential LVS windows described in
the Section 4.
H Section 6 Live Controller 
Describes the functions of the buttons, knob
and T-bar, and the displayed status messages on the LVS Live Controller.
The following four sections are for servicing the LVS Live Controller:
H Section 7 Preparation for Use 
Describes preparations for basic
operating procedures of the LVS Live Controller for servicing. Also
includes information about the key configuration.
H Section 8 Lever Adjustment 
Describes calibration/adjustment of the
T-bar.