beautypg.com

Window description – Grass Valley LVS 100 v.3.15 User Manual

Page 136

background image

LVS Controller Window (Record Controller)

4-18

Profile LVS Event Management System Instruction Manual

Window Description

A, B, C, D

Select the codec resource group to be controlled. Each resource

group, such as a 1 Channel Rec/Play or a 2 Channels Rec/Play, is assigned a
letter (A, B, C or D) as previously discussed on page 3–5.

Preroll 1, Preroll 2, and Preroll 3

Select one of three preset Prerolls 1, 2 or 3 to

enable it. The value set during configuration is displayed next to each selection.

Postroll

Select or deselect Postroll.

ACG.. Although the Live Controller has dedicated buttons for selection of
Preroll, it has no buttons for selection of Postroll. Postroll selection or
deselection must be performed from the Controller Window.

For Preroll and Postroll setup, refer to Timing Presets on page 3–13.

Recorder Time

The last time recorded (time code) is displayed. While

recording is paused, the display is also paused.

Player Time

The time code currently playing is displayed. While playing is

paused, the display of the time code is also paused.

Delay Time

The elapsed time since recording of the material currently being

played is displayed (the difference between recorder time and player time).

This function is helpful when you want to know how much the played material is
delayed from the actual recorded time.

REC

Starts recording on the selected resource.

STOP

Stops recording on the selected resource.

CONT

In CONT, or Continuous mode, playback does not stop when the OUT

point of a scene is reached.

STEP

In STEP mode, playback will stop when the OUT point of a scene is

reached. The actual stop point will depend on the Postroll setting.

Selects the output mode of the channels when stopped. Note that even though the
LVS Live Controller is used to control the system, Monitor Mode must be set
using this button.

EE

This setting places the outputs in the E–to–E mode. When E–E is selected,

an input signal is routed to the output during stop or record.

Resource Select

Preroll Options

Information Display

Record Control

Play Mode

Monitor Mode

This manual is related to the following products: