Grass Valley LVS 100 v.3.15 - Manual (Page 125)

Main Window
Profile LVS Event Management System Instruction Manual
4-7
Figure 4-4: Save Specification Dialog box
Saving is specified by selecting Yes in the dialog box ”Save current window
information?” when the LVS software is closed.
If No is selected, another dialog box will be displayed asking ”Force default
setting?.” Selecting Yes will return to the factory default setting. Selecting No
will return to the setting at the startup of the LVS software.
For complete system shutdown, refer to System Shutdown on page 2–32.
Either of the following two functions can be checked.
Auto Cleanup 
The Profile system automatically deletes material which has not
been used in any scenes (when the remaining disk capacity becomes low).
Manual Cleanup 
Press the Disk Cleanup button on the Main Window to
execute Disk Cleanup.
ACG.. When in Loop Record mode, do not select Manual Cleanup. Selecting
Manual Cleanup causes Loop Record mode to operate improperly.
Cue up of a scene or event may take more time than normal if it is requested
while a disk cleanup is in progress. If this wait time is unacceptable, you may
choose to cancel the execution of the disk cleanup.
You may also wish to cancel cleanup operations to speed up the display of
thumbnails in the Highlight and Library windows in real time.
Disk cleanup is canceled for the scenes and highlights created in the current
session, not for deletion of the existing libraries.
Disk Menu
Cancel Cleanup